|
The following
EWCAP information is available on this Web site:
The following
EWCAP information is available from SAE:
- SAE/USCAR-1: (Revision
1) Salt spray testing and evaluation of fasteners
- SAE/USCAR-2: (Revision
5) Specification for Automotive Electrical Connector Systems
-
SAE/USCAR-3: (Revision 3) Specification for Testing Automotive Miniature Bulbs
- SAE/USCAR-4: Specification
for Cigar Lighters and Power Outlets
- SAE/USCAR-5: (Revision 3) Avoidance of Hydrogen Embrittlement in steel
- SAE/USCAR-6: Standard for Brush Motor HVAC Blower
- SAE/USCAR-7: De-embrittlement verication test
- SAE/USCAR-8: (Rev 2) Grain Flow Pattern for Bolts, Screws, and Studs
- SAE/USCAR-9: Classification system for Tooling, Machinery, and Equipment for Low VOC Waterborne paint systems
- SAE/USCAR-10: (rev 2) Test for evaluating the Torque-Tension relationship of both External and Internal Metric threaded fasteners
- SAE/USCAR-11: (Rev 1)Torque-Tension and Evaluation of Fastener Finishes
- SAE/USCAR-12: (Revision 3) Design Guidelines for Automotive Electrical Connector Systems
- SAE/USCAR-13: Stanard for in tank fuel pump
- SAE/USCAR-14: (Revision 2) Specification for Testing Automotive Halogen Light Sources
- SAE/USCAR-15: (Revision 3) Specification
for Testing Automotive Light Sockets
- SAE/USCAR-16: Unused number
- SAE/USCAR-17: (Revision 2) Performance Specification for Automotive RF Connector Systems
- SAE/USCAR-18: (Revision
2) FAKRA/SMB RF Connector Supplement
- SAE/USCAR-19: (Revision
1) Coaxial Cable Connector Interface Square Outer Conductor
- SAE/USCAR-20: (Revision
1) Field Correlated Life Test
- SAE/USCAR-21: (Revision
2) Performance Specification for Cable-To-Terminal Electrical
Crimps
- SAE/USCAR-22:Unused number
- SAE/USCAR-23:
Road Vehicles - 60 V and 600V single core (ISO/Metric)
cables - Dimensions, test methods and requirements
- SAE/USCAR-24:
USCAR Inflator Technical Requirements and Validation
- SAE/USCAR-25: (Revision 1)
Electrical Connector Assembly Ergonomic Design Criteria
- SAE/USCAR-26:
Finish Evaluation Electrical Ground Test Procedure
- SAE/USCAR-27:
Specification for testing Gas Discharge Light Source Subsystem
- SAE/USCAR-28:
Inflator Technical Requirements and Validation
- SAE/USCAR-29:
Automotive Grade Coaxial Cable performance Specification
- SAE/USCAR-30:
Performance Specification for Automotive Universal Serial Bus (USB) Connection System
- SAE/USCAR-31:Unused number
- SAE/USCAR-32:New Finish Development
- SAE/USCAR-33:Unused number
- SAE/USCAR-34:Specification for Testing Lamp Assemblies
- SAE/USCAR-35:Test Specification for Evaluating
Bolt-Load Retention of Magnesium Alloys
- SAE/USCAR-36:Unused number
- SAE/USCAR-37:
High Voltage Connector Performance supplement to SAE/USCAR 2
- SAE/USCAR-38:Performance Specification for
Ultrasoniclly welded-Wire Cable termination
To purchase any of these standards
and guidelines, go to www.sae.org.
The following
EWCAP information is in development:
- SAE/USCAR-12: (Revision 3) Wiring component design guidlines:Released July 2009. Revision letter pending.
The following
EWCAP information is no longer being published:
- SAE/USCAR-2: (Revision
4) Standard for Automotive Electrical Connector Systems
(replaced by SAE/USCAR-2: Revision 5)
- SAE/USCAR-3: (Revision
2) Standard for Testing Automotive Miniature Bulbs (Replaced
by SAE/USCAR-3 Revision 3)
- SAE/USCAR-5: Avoidance
of Hydrogen Embrittlements of Steel (replaced by SAE/USCAR 5 - Revision 3)
- SAE/USCAR-8: Grain Pattern for Bolts, Screws, and Studs
(replaced by SAE/USCAR-8: Revision 2)
- SAE/USCAR-10: Test for Evaluating the Torque- Tension Relationship of Both External and Internal Metric Threaded Fasteners (replaced by SAE/USCAR-10: Revision 2)
- SAE/USCAR-12:
(Revision 1) Wiring Component Design Guidelines (replaced by SAE/USCAR-12: Revision 2)
- SAE/USCAR-14: Specification for Testing Automotive Halogen Light Sources (replaced by SAE/USCAR-14: Revision 2)
- SAE/USCAR-15: Specification
for Testing Automotive Light Sockets (replaced
by SAE/USCAR-15 revision 2)
- SAE/USCAR-17:
(Revision 1) Specification for Testing Automotive RF Connector
Systems (replaced by SAE/USCAR 17: Revision 2)
- SAE/USCAR-18:
(Revision 1) FAKRA/SMB RF Connector Supplement (replaced
by SAE/USCAR-18 Revision 2)
- SAE/USCAR-19:
Coaxial Cable Connector Interface Square Outer Conductor
(replaced by SAE/USCAR-19 revision 1)
- SAE/USCAR-20:
Field Correlated Life Test Supplement to SAE/USCAR 2
(replaced by SAE/USCAR-20 revision 1)
- SAE/USCAR-21 rev 1:Performance
Specification for Cable-To-Terminal Electrical Crimps (replaced
by SAE/USCAR-21 revision 2)
- SAE/USCAR-25:Electrical Connector Assembly Ergonomic Design Criteria
(replaced by SAE/USCAR-25 revision 1)
- SAE/USCAR-32:New Finish Development (replaced by SAE/USCAR-32 revision 1)
|
